Do you think having power is as easy as turning on a light switch or plugging an appliance into the wall maybe yes, but after reading this your opinion may change.This research L he article will discuss the idea of ​​barehanding and how to work on live power lines. There is a certain technique called barehanding. “Barehanding” is a safe way for trained transmission linemen to work on high voltage power lines, while connected to a fully energized conductor (tower or helicopter). This technique is used to perform required maintenance such as replacing insulators, connecting hardware and conductors on transmission lines. It's not very common but the idea of ​​barehanding is growing. Being bare handed can be dangerous because there is dangerous voltage and when electricity enters your body, it has to come out somewhere. To avoid contact between the worker and the energized subject, safety must be practiced through the use of equipment. First, while bare hands is a suit that consists of wearing protective clothing while the wire is under tension, the suit is made up of specialized boots, sock protectors with microscopic stainless steel fibers woven in, as well as a helmet. The $1,300 outfit comes with boots with conductive soles, a sweater, a hooded T-shirt, gloves and socks. The linemen wear flame-retardant clothing that includes hoodies, long-sleeved shirts, pants, winter clothing and coveralls. A well-known distributor that produces this clothing is Carhart. Additionally, linemen must wear safety glasses, steel-toed boots, leather gloves and appropriate safety equipment. Proper safety equipment may include equipment such as fire-retardant harnesses. Every day the linemen check all their people... half of the paper... it's rotten, there's a certain procedure you can follow. You can always test the pole first. This involves taking the hammer and hitting the post. If hitting the post makes a peculiar noise, the post is rotten. Another method is to drill a hole in the post at ground level and by doing this you will be able to tell if the post is rotten. If it is you will obviously need to replace the post, but if it isn't rotten you should plug the hole you just made. If you don't plug the hole, future problems can occur. This research paper consisted of the idea of ​​barehanding and how to work on live power lines. It also informs you of all the things you need to be aware of. But above all how to stay safe at work. Now, since you read this, next time you flip a light switch just think about everything that happens when you do.